Custom Cue #12

This is a butt to match an existing BK Rush shaft with radial pin.

Customer wants this to be quite plain, Black handle and grey forearm with silver rings.

Handle is Ebony, forearm is Prickly Ash stained grey.

Butt cap is white Tomahawk, Joint collar is black Tomahawk.

Cue Type

Break

Butt

Shaft

Pin
Radial
Joint Collar
Tomahawk
Rings
Brass/White
Forearm
Prickly Ash
Handle
Ebony
Butt Sleeve
Prickly Ash
Butt Collar
Tomahawk
Butt Length (mm)
736
Construction
Full Maple core
Laminated core turned and glue grooves cut. c12
Ebony mounted to turn handle round. c12
Turned handle. c12
Coring the ebony handle. c12
Handle and forearm with holes bored. c12
Handle glued. c12
Rings and butt sleeve in place. c12
Core machined to accept forearm. c12
Forearm glued and screwed in place and test stain. c12
Forearm in place. c12
Profile first pass. c12
Butt cap installed. c12
Sealer applied after initial sanding. c12
Sealer applied after initial sanding. c12
First coat of grey. c12
Second coat. c12
First coat of clear finish. c12
Radial pin glued in place with epoxy. c12
Test weigh after pin install, 520g (18.3oz). c12
Tapping for weight bolts. c12
Finished cue.