This cue has ebony butt sleeve and forearm with Tasmanian Blackwood handle.

Rings are Ebony and reconstituted stone, inlays are Mountain Ash and stone.

This is the first cue I have done with the 3/8x10 modified pin as I have always wanted to try it on my own cue.

So, I guess this cue will be for me! 

Was asked to make a wrapless cue with Ebony points. Forearm is Curly Maple and the Handle is Zebrano.

There is a quick release bumper for a telescopic extension.

This is a butt only to match a customers BK Rush shaft.

The client has specified all Fuschia coloured forend, Uniloc quick release pin, 737mm (29") length and  553g (20oz) total weight.

The radial laminated maple core was turned to size, glue relief grooves cut and the Tasmanian Blackwood handle glued in place. Forend is Prickly Ash and will be stained.

Butt cap and joint collar will be black Tomahawk to stay with colour scheme.

This is a butt only to match a customers shaft.

The client has specified all black colour, Uniloc quick release pin, 737mm (29") length and  553g (19.5oz) total weight.

The laminated maple core was turned to size, glue relief grooves cut and the Tasmanian Blackwood pieces glued in place. Because it is only possible to drill about 350mm with a gun drill, 3 pieces will be combined.

Butt cap and joint collar will be black Tomahawk to stay with colour scheme.

There will be a carbon fibre 8" extension as well.

This cue has a curly maple forearm with ebony points and coloured veneers.

Butt sleeve is ebony with green reconstituted stone and brass inlays.

Handle is Tasmanian Blackwood, but I think I will add a black leather wrap.

Pin is Uniloc quick release.

Butt sleeve and forearm are Ebony.

Handle is Tasmanian Blackwood.

I wanted to do a few nice inlays on this cue.

The Ebony butt sleeve has Tasmanian Blackwood and White Tomahawk inlays.

Rings are Ebony/Maple and Brass.

A nice black textured leather wrap was added to finish it off.

My own carbon fiber shaft is included with Ultraskin medium tip.

This is a full 30" (760mm) cue. 

Ebony inlayed butt sleeve.

I started this one with the forearm first! Tasmanian Blackwood forearm with Victorian Mountain Ash inlay points. Laminated rock maple core inside Zebrano handle. Reconstituted stone inlays in the butt sleeve.

Initially I fitted white butt cap and collar, but I didn't like the contrast, so I replaced them in black.

Pin is Uniloc Radial.

Cue has a happy home in Thailand.

My latest shipment of leather has just arrived and I wanted to do a cue with a nice colourful leather wrap.

I built the butt cap first for this cue and it was made from Curly Maple with 18 black inlays.